incomprehensible character changes in the menu.
FIX NO SIGNAL ON TV TV
the switch-on pulse passes, the TV «comes to life», but freezes while loading.Sometimes firmware could be flashed you’ll detect it by following signs: antenna is mechanically damaged and unsuitable for receiving a signal.check if the satellite converter working proper, if no – replace it.The solution is to find the damage and fix it. cable from antenna to satellite receiver can be damaged.check the receiver settings, make sure that they are correct.If there is just showing «NO SIGNAL» without interferences, the problem is in satellite. try to connect the receiver and the TV with a cable to the other connectors.If not, choose the right one using the TV remote control make sure that the correct video input is selected on the TV.If it showing «NO SIGNAL» and there are interferences on TV, or the signal is very weak, it means that there is no signal exactly from the receiver, not from satellite. It is much easier to twist, but this method is short-lived, because the wire can be torn and damaged again. Make insulation at the solder points with insulating tape or heat shrink.Ĭomparing two these methods, soldering is more reliable, but you need to have experience and be very careful, that is why you need to be a specialist to do it.Using flux, solder the places of twisting so that the tin spreads evenly at the junction of the wires.Twist the dangling conductors according to the color marking for 4–5 turns.Clean the ends from polyethylene and varnish isolation.To make it you would need next equipment: Insulate each wire at the point of twisting with electrical tape.After this, use the side cutters to remove the tousled ends of the conductors, to make the twisting neater. Twist the stripped ends of the dangling wires together for at least 4-5 tight turns, observing their color marking.Strip the cord from polyethylene insulation so that metal parts of the required length are visible for twisting them together.
In this case you won’t need to much of equipment: frequent deformation and bending during operation of the device Īttention! If you find out, the wire is damaged, then the appliance connected to it must be immediately disconnected from the network or from the connected device.Īnd now, let’s have a closer look on methods of fixing the wire break.inaccurate user actions that led to mechanical damage.There are two ways of fixing the wire or cable by you, without help of specialists:īut in any way you need to be careful and follow all safety instructions. Wire cores and isolation don’t last forever and sometimes they are torn. Some element inside TV is not working in the proper way.The socket, where antenna plug would be inserted is damaged.If you make sure, that everything is okay with antenna and connection, and you paid for the TV, probably: You can always call your operator to double-check the payment and also maybe there are some problems exactly with your operator. If you have been using TV for a long time, first of all, check did you paid for TV. Sometimes new TV does not catch the signal. are the channels tuned in the right way.how the cable is connected to the antenna, whether it is in the proper position and condition.whether the plug is inserted tightly into the correct connector.It means, that you have some problems with antenna. Sometimes, after turning on a TV you can see the message: «NO SIGNAL» on its screen. We repair all major TV brands and models including: Samsung, LG, Sony, VIZIO, TCL, Element, Insignia, Sharp, Hisense, Philips, Loewe, Mitsubishi, Panasonic, Toshiba, RCA, Sanyo and many others.
The problem TV has no signal can be found on TVs of all brands. We repair most 32” to 110” TV models released after 2008. We can fix the problem TV has no digital signal on TVs of any type: LCD, Plasma, LED, OLED, Smart TV, 8K, 4K, QLED. We can fix this problem in your home or in our shop just from $80.
0 kommentar(er)
